| |
Air Conditioning |
| |
-
ACR 111 - Principles of Refrigeration
3 Hours: 1T, 4L
This course emphasizes the fundamental principles for air conditioning and refrigeration. Instruction is provided in the theory and principles of refrigeration and heat transfer; HVACR system components; common and specialty tools for HVACR; and application of the concepts of basic compression refrigeration. Upon completion, the student should identify system components and understand their functions, identify and use common and specialty HVACR tools, and maintain components of a basic compression refrigeration system. This is a CORE course.
|
| |
-
ACR 112 - HVACR Service Procedures
3 Hours: 1T, 4L
This course covers system performance checks and refrigerant cycle diagnosis. Emphasis is placed on the use of refrigerant recovery/recycle units, industry codes, refrigerant coils, and correct methods of charging and recovering refrigerants. Upon completion, the student should be able to properly recover/recycle refrigerants and demonstrate safe, correct service procedures which comply with the no-venting laws.
|
| |
-
ACR 113 - Refrigeration Piping Practices
3 Hours: 1T, 4L
This course introduces students to the proper installation procedures of refrigerant piping and tubing for the heating, ventilation, air conditioning, and refrigeration industry. This course includes various methods of working with and joining tubing. Upon completion, the student should understand related terminology and be able to identify ACR pipe, tubing, and various fittings. This is a CORE course.
|
| |
-
ACR 120 - Fundamentals of Electric Heating Systems
3 Hours: 1T, 4L
This course covers the fundamentals of electric heating systems. Emphasis is placed on components, general service procedures, and basic installation. Upon completion, the student should be able to install and service electric heating systems and heat pumps.
|
| |
-
ACR 121 - Principles of Electricity for HVACR
3 Hours: 1T, 4L
This course is designed to provide the student with the basic knowledge of electrical theory and circuitry as it pertains to air conditioning and refrigeration. This course emphasizes safety, definitions, symbols, laws, circuits, and electrical test instruments. Upon completion, the student should understand and be able to apply the basic principles of HVACR circuits and circuit components. This is a CORE course.
|
| |
-
ACR 122 - HVACR Electric Circuits
3 Hours: 1T, 4L
This course provides the student with advanced applications of electrical circuits and diagrams. The student constructs a variety of wiring diagrams commonly found in HVACR electrical systems. Upon completion, the student should understand standard wiring diagrams and symbols and be able to construct various types of electrical circuits. This is a CORE course.
|
| |
-
ACR 123 - HVACR Electrical Components
3 Hours: 1T, 4L
During this course students learn characteristics and operations of various electrical components and controls. Emphasis is placed on the operation of motors, relays, contactors, starters, and other HVACR electrical components. Upon completion, the student should be able to install various electrical components and determine their proper operation. This is a CORE course.
|
| |
-
ACR 125 - Fundamentals of Gas and Electrical Heating Systems
6 Hours: 2T, 8L
This course provides instruction in general service and installation for common gas and electrical heating systems. Emphasis is placed on components, general service procedures, and basic installation. Upon completion, the student should be able to install and service gas and electrical heating systems in a wide range of applications.
|
| |
-
ACR 127 - HVACR Electric Motors and Components
3 Hours: 1T, 4L
This course covers the basic auxiliary services of electric motors used in HVACR systems. Course topics include types, operation, installation, and troubleshooting of motors and related components. Upon completion, the student should be able to install and service various types of HVACR electric motors and related components.
|
| |
-
ACR 128 - Heat Load Calculations
3 Hours: 3T
This course focuses on heat flow into and out of buildings. Emphasis is placed on determining heat gain/heat loss of a given structure. Upon completion, students should be able to calculate heat load and determine HVAC equipment size requirements.
|
| |
-
ACR 132 - Residential Air Conditioning
3 Hours: 1T, 4L
This course introduces students to residential air conditioning systems. Emphasis is placed on the operation, service, and repair of residential air conditioning systems. Upon completion, the student should be able to service and repair residential air conditioning systems.
|
| |
-
ACR 134 - Ice Machines
3 Hours: 1T, 4L
This course introduces students to ice machine types and their operation, emphasizing function, installation, auxiliary services, and troubleshooting. Upon completion, the student should be able to perform installation and auxiliary services procedures.
|
| |
-
ACR 135 - Mechanical/Gas/Safety Codes
3 Hours: 3T
This course is to enhance the student’s knowledge of the International Fuel Gas Code and International Mechanical Code as well as fire and job safety requirements. Emphasis is placed on code book content and compliance with installation requirements. Upon completion, students should be able to apply code requirements to all work.
|
| |
-
ACR 138 - Customer Relations
3 Hours: 3T
This course covers the basic aspects of customer relations needed to be an HVAC technician. Topics include employability skills associated with job performance, record keeping, service invoices, certification requirements, local ordinances, and business ethics.
|
| |
-
ACR 144 - Basic Drawing and Blueprint Reading in HVAC
3 Hours: 3T
This course covers basic drawing and blueprint reading as applied to the HVAC industry. Emphasis is on three-view drawings, basic duct systems, and isometric piping. Upon course completion, students should be able to perform basic drawings related to HVAC systems and read pertinent blueprints.
|
| |
-
ACR 147 - Refrigeration Transition and Recovery
3 Hours: 3T
This course is EPA-approved and covers material relating to the requirements necessary for Type I, II, III, and universal certification. Upon completion, the student should be prepared to take the EPA 608 certification exam.
|
| |
-
ACR 148 - Heat Pump Systems I
3 Hours: 1T, 4L
This course provides basic instruction on the operation and servicing of heat pump systems. Additional emphasis is placed on basic theory and application of refrigerants for heat pump systems and on basic service of components. Upon completion, the student should be able to install and service heat pumps.
|
| |
-
ACR 149 - Heat Pump Systems II
3 Hours: 1T, 4L
This is a continuation course of the basic theory and application of heat pump systems. Emphasis is placed on electrical components of heat pumps and their function. Students should possess a strong foundation of electrical principles and theory. Upon completion, the student should be able to install and service heat pumps.
|
| |
-
ACR 181 - Special Topics in Air Conditioning and Refrigeration
3 Hours: 3T
This course provides specialized instruction in various areas related to the air conditioning and refrigeration industry. Emphasis is placed on meeting the student’s needs.
|
| |
-
ACR 192 - HVAC Apprenticeship/Internship
3 Hours: 15i
This course is designed to provide basic hands-on experiences in the work place. The student is provided with a training plan developed by the employer and instructor working together to guide the learning experience. Upon completion, the student should be able to work independently and apply related skills and knowledge. This course requires a minimum of fifteen work hours per week.
|
| |
-
ACR 200 - Review for Contractor Exam
3 Hours: 3T
This course prepares students to take the State Certification Examination. Emphasis is placed on all pertinent codes, piping procedures, duct design, load calculation, psychometrics, installation procedures, and air distribution. Upon completion, students should be prepared to take the contractor exam.
|
| |
-
ACR 205 - System Sizing and Air Distribution
3 Hours: 1T, 4L
This course provides instruction in the load calculation of a structure and system sizing. Topics of instruction include heat loss, heat gain, equipment and air distribution sizing, and factors making acceptable indoor air quality. Upon completion, the student should be able to calculate system requirements.
|
| |
-
ACR 210 - Troubleshooting HVACR Systems
3 Hours: 1T, 4L
This course provides instruction in the use of various meters and gauges used in the HVACR industry. Emphasis is placed on general service procedures, system diagnosis, corrective measures, methods of leak detection, system evacuation, charging, and performance checks. Upon completion, the student should be able to perform basic troubleshooting of mechanical and electrical components of HVACR systems.
|
Air Force Studies |
| |
-
AFS 101 - Leadership Laboratory
1 Hour
This course is a survey course of topics relating to the Air Force and national defense. It includes a discussion of purpose, structure, and career opportunities in the United States Air Force and is an introduction to effective written communication. The AFS 101 Leadership Laboratory is a co-curricular activity including a study of Air Force customs and courtesies, drill and ceremonies, and military commands.
|
| |
-
AFS 110 - Foundations of the USAF
1 Hour
This course is an introduction to interpersonal communications. Seminars focus on effective listening techniques and verbal and nonverbal communications. Practical exercises and group projects are designed to demonstrate barriers to effective communications, techniques to overcome barriers, development and presentation of oral communications, strategy, technique, and delivery of effective oral presentations. Student practicum is required. The AFS 102 Leadership Laboratory is a co-curricular activity that includes a study of Air Force customs and courtesies, drill and ceremonies, and military commands.
|
| |
-
AFS 201 - Leadership Laboratory
1 Hour
Prerequisite: AFS 101
This course is a historical survey of technological innovation in warfare. Focus is on the emergence of air power and its significance in war and national security policy implementation. The AFS 201 Leadership Laboratory is a co-curricular activity including a study of Air Force customs and courtesies, drill and ceremonies, and military commands.
|
| |
-
AFS 202 - The Air Force Way II
1 Hour
This course is an analysis of leadership and follower-ship traits in the context of a modern military force. The course includes discussions of ethical standards of military officers, Air Force core values, and an introduction to total quality management as advanced practical application of oral communication skills, including organization, research, delivery, and audience analysis for briefing and presentations. Group leadership problems are designed to enhance interpersonal communications. The AFS 202 Leadership Laboratory is a co-curricular activity including a study of Air Force customs and courtesies, drill and ceremonies, and military commands.
|
Anthropology |
| |
-
ANT 200 - Introduction to Anthropology
3 Hours
Prerequisite: RDG 085 or higher placement
This course is a survey of the physical, social, and cultural development and behavior of human beings.
|
| |
-
ANT 210 - Physical Anthropology
3 Hours
Prerequisite: RDG 085 or higher placement
This course is a study of the human evolution based upon fossil and archaeological records, as well as analysis of the variation and distribution of contemporary human populations.
|
| |
-
ANT 220 - Cultural Anthropology
3 Hours
Prerequisite: ANT 200 .
This course is the application of the concept of culture to the study of both primitive and modern society.
|
| |
-
ANT 230 - Introduction to Archaeology
3 Hours
Prerequisite: RDG 085 or higher placement
This course is an introduction to archaeological excavation techniques and post-excavation laboratory procedures.
|
Art |
| |
-
ART 100 - Art Appreciation
3 Hours
Prerequisite: None
This course is designed to help the student find personal meaning in works of art and develop a better understanding of the nature and validity of art. Emphasis is on the diversity of form and content in original art work. Upon completion, the student should understand the fundamentals of art and the materials used, as well as have a basic overview of the history of art.
|
| |
-
ART 109 - Art Museum Survey
3 Hours
This course covers the art experienced through supervised visits to museums and art galleries. Emphasis is placed on learning through critical study. Upon completion, the student should be able to write a critical analysis of the art work experienced that demonstrates an understanding of aesthetics.
|
| |
-
ART 113 - Drawing I
3 Hours
This course provides the opportunity to develop perceptional and technical skills in a variety of media. Emphasis is placed on communication through experimenting with composition, subject matter, and technique. Upon completion, the student should demonstrate and apply the fundamentals of art to various creative drawing projects.
|
| |
-
ART 114 - Drawing II
3 Hours
Prerequisite: ART 113 .
This course advances the student’s drawing skills in various art media. Emphasis is placed on communication through experimentation, composition, technique, and personal expression. Upon completion, the student should demonstrate creative drawing skills, the application of the fundamentals of art, and the communication of personal thoughts and feelings.
|
| |
-
ART 121 - Two-Dimensional Composition I
3 Hours
This course introduces the basic concepts of two-dimensional design. Topics include the elements and principles of design with emphasis on the arrangements and relationships among them. Upon completion, the student should demonstrate an effective use of these elements and principles of design in creating two-dimensional compositions.
|
| |
-
ART 127 - Three-Dimensional Composition
3 Hours
Prerequisite: ART 113 or ART 121 .
This course introduces art materials and principles of design aquainting the beginner with the fundamentals of three-dimensional art. Emphasis is placed on the use of art fundamentals and the creative exploration of materials in constructing three-dimensional art works. Upon completion, the student should demonstrate basic technical skills and a personal awareness of the creative potential inherent in three-dimensional art forms.
|
| |
-
ART 143 - Crafts II
3 Hours
This course is an introduction to various creative crafts, which may include work with fibers, metal, glass, or other media. Emphasis is placed on processes, techniques, materials, and creative expression. Upon completion, the student should be able to demonstrate creative uses of materials, knowledge of the fundamentals of art, and an understanding of craftsmanship and aesthetic quality.
|
| |
-
ART 173 - Photography I
3 Hours
Note: A 35mm single-lens reflex camera is required.
This course is an introduction to the art of photography. Emphasis is placed on the technical and aesthetic aspects of photography with detailed instruction in darkroom techniques. Upon completion, the student should understand films, chemicals, papers, and the camera as a creative tool. Composition and history is also included in the course.
|
| |
-
ART 174 - Photography II
3 Hours
Prerequisite: ART 173
Note: A 35mm single-lens reflex camera is required.
This course advances the students’ technical and aesthetic knowledge of photography beyond the introductory level. Emphasis is placed on photographic composition and darkroom techniques as a means of communication. Upon completion, the student should demonstrate creative and communication skills through the photographic process.
|
| |
-
ART 175 - Digital Photography
3 Hours
Note: The student needs a digital single-lens reflex camera.
This course introduces student to digital imaging techniques. Emphasis is placed on the technical application of the camera, digital photographic lighting methods, and overall composition. Upon completion, students should be able to take digital images and understand the technical aspects of producing high quality photos.
|
| |
-
ART 180 - Introduction to Graphic Design
3 Hours
This course is a general introduction to graphic design. Topics include history, processes, and production design. Upon completion, the student should understand the concepts used to create media graphics.
|
| |
-
ART 203 - Art History I
3 Hours
Prerequisite: RDG 085 or higher placement
This course covers the chronological development of different forms of art, such as sculpture, painting, and architecture. Emphasis is placed on history from the ancient period through the Renaissance. Upon completion, the student should be able to communicate a knowledge of time period and chronological sequence including a knowledge of themes, styles, and societal impact on the arts.
|
| |
-
ART 204 - Art History II
3 Hours
Prerequisite: RDG 085 or higher placement
This course covers a study of the chronological development of different forms of art, such as sculpture, painting, and architecture. Emphasis is placed on history from the Baroque to the present. Upon completion, the student should be able to communicate a knowledge of time period and chronological sequence including a knowledge of themes, styles, and societal impact on the arts.
|
| |
-
ART 231 - Watercolor Painting I
3 Hours
Prerequisite: ART 113 or ART 121
This course introduces materials and techniques appropriate to painting on paper with water-based medium. Emphasis is placed on developing the technical skills and the expressive qualities of watercolor painting. Upon completion, the student should be able to demonstrate a basic proficiency in handling the techniques of watercolor and how it can be used for personal expression.
|
| |
-
ART 232 - Watercolor Painting II
3 Hours
Prerequisite: ART 231
This course advances the skills and techniques of painting on paper using water-based medium. Emphasis is placed on exploring the creative uses of watercolor and developing professional skills. Upon completion, the student should demonstrate and compile a body of original paintings reflecting a personal awareness of the media’s potential.
|
| |
-
ART 233 - Painting I
3 Hours
Prerequisite: ART 113 or ART 121
This course is designed to introduce the student to fundamental painting processes and materials. Topics include art fundamentals, color theory, and composition. Upon completion, the student should be able to demonstrate the fundamentals of art and discuss various approaches to the media and the creative processes associated with painting.
|
| |
-
ART 234 - Painting II
3 Hours
Prerequisite: ART 233
This course is designed to develop the student’s knowledge of the materials and procedures of painting beyond the introductory level. Emphasis is placed on the creative and technical problems associated with communicating through composition and style. Upon completion, the student should be able to demonstrate the application of the fundamentals of painting and the creative process to the communication of ideas.
|
| |
-
ART 243 - Sculpture I
3 Hours
Prerequisite: ART 125 or ART 127
This course provides a study of three-dimensional form by familiarizing students with sculpting media and techniques. Topics include the fundamentals of art and sculpting media with emphasis on the creative process. Upon completion, the student should understand the fundamentals of art and three-dimensional form, as well as the various media and processes associated with sculpture.
|
| |
-
ART 244 - Sculpture II
3 Hours
Prerequisite: ART 243
This course is designed to sharpen the student’s skills in the media and processes of sculpture. Emphasis is placed on personal expression through three-dimensional form. Upon completion, the student should be able to apply the fundamentals of art, knowledge of form, and the sculptural processes to communicating ideas.
|
| |
-
ART 275 - Advanced Digital Photography
3 Hours
Prerequisite: ART 175
This course explores various uses of digital photography. Subject areas may include studio, portrait, and landscape photography. Upon completion, the student should be able to apply the techniques necessary to produce professional photographs of a variety of subjects.
|
| |
-
ART 291 - Supervised Study in Studio Art I
1-4 Hours
Prerequisite: Permission of instructor
This course is designed to enable the student to continue studio experiences in greater depth. Topics are to be chosen by the student with the approval of the instructor. Upon completion, the student should have a greater expertise in a particular area of art.
|
| |
-
ART 292 - Supervised Study in Studio Art II
3 Hours
Prerequisite: ART 291
This course is designed to enable the student to continue studio experiences in greater depth. Topics are to be chosen by the student with the approval of the instructor. Upon completion, the student should have greater expertise in a particular area of art.
|
Astronomy |
| |
-
AST 220 - Introduction to Astronomy
4 Hours
Prerequisite: RDG 085 and ENG 092 or higher placement
This course covers the history of astronomy and the development of astronomical thought leading to the birth of modern astronomy and its most recent developments. Emphasis is placed on the coverage of astronomical instruments and measuring technologies, the solar system, the Milky Way galaxy, important extra-galactic objects, and cosmology. Laboratory is required.
|
Auto Body Repair |
| |
-
ABR 111 - Non-structural Repair
3 Hours: 1T, 4L
Students are introduced to basic principles of non-structural panel repairs. Topics include shop safety, identification and use of hand/power tools, sheet-metal repairs, and materials. Upon completion, the student should be able to perform basic sheet-metal repairs.
|
| |
-
ABR 114 - Non-structural Panel Replacement
3 Hours: 1T, 4L 3 Hrs.
Students are introduced to the principles of non-structural panel replacement. Topics include replacement and alignment of bolt-on panels, full and partial panel replacement procedures, and attachment methods.
|
| |
-
ABR 122 - Surface Preparation
3 Hours: 1T, 4L
This course introduces students to methods of surface preparation for vehicular refinishing. Topics include sanding techniques, metal treatment, selection of undercoats, and proper masking procedures.
|
| |
-
ABR 123 - Paint Application and Equipment
3 Hours: 1T, 4L
This course introduces students to methods of paint application and equipment used for vehicular refinishing. Topics include spray gun and related equipment use, paint mixing, matching, and applying the final topcoat.
|
| |
-
ABR 151 - Safety and Environmental Practices
3 Hours: 1T, 4L
This course is designed to instruct the student in safe work practices. Topics include OSHA requirements, EPA regulations, as well as state and local laws. Upon completion, the student should be knowledgeable in shop safety and environmental regulations. This is a CORE course.
|
| |
-
ABR 154 - Auto Glass and Trim
3 Hours: 1T, 4L
This course is a study of automotive glass and trim. Emphasis is placed on removal and replacement of structural glass, non-structural glass and auto trim. Upon completion, the student should be able to remove and replace automotive trim and glass.
|
| |
-
ABR 156 - Automotive Cutting and Welding
3 Hours: 1T, 4L
Students are introduced to the various automotive cutting and welding processes. Emphasis is placed on safety, plasma arc and oxy-acetylene cutting, resistance type spot welding, and Metal Inert Gas (MIG) welding. Upon completion, the student should be able to safely perform automotive cutting and welding procedures.
|
| |
-
ABR 157 - Automotive Plastic Repairs
3 Hours: 1T, 4L
This course provides instruction in automotive plastic repairs. Topics include plastic welding (airless, hot, and chemical), use of flexible repair fillers, identification of types of plastics, and determination of the correct repair procedures for each. Upon completion, students should be able to correctly identify and repair the different types of automotive plastics.
|
| |
-
ABR 182 - Special Topics in Auto Body
3 Hours: 6L
This course is guided independent study in special projects to give the student additional training in a specific area selected by the instructor. Emphasis is placed on individual student needs to improve or expand skills. Upon course completion, students should be able to demonstrate skills to meet specific needs.
|
| |
-
ABR 213 - Automotive Structural Analysis
3 Hours: 1T, 4L
Students learn methods of determining structural misalignment. Topics include methods of inspection, types of measuring equipment, data sheets, and identification of types of structural damage.
|
| |
-
ABR 214 - Automotive Structural Repair
3 Hours: 1T, 4L
This course provides instruction in the correction of structural damage. Topics include types and uses of alignment equipment, anchoring and pulling methods, and repair/replacement of structural components.
|
| |
-
ABR 223 - Automotive Mechanical Components
3 Hours: 1T, 4L
This course provides instruction in collision-related mechanical repairs. Emphasis is placed on diagnosis and repairs to drive train, steering/suspension components, and other mechanical repairs.
|
| |
-
ABR 255 - Steering and Suspension
3 Hours: 1T, 5L
This course introduces the student to the various types of suspension and steering systems used in the automotive industry. Emphasis is placed on system components, suspension angles and effect of body/frame alignment on these components and angles. Upon completion, the student should be able to repair and/or replace damaged components and prepare the vehicle for alignment.
|
| |
-
ABR 265 - Paint Defects and Final Repair
3 Hours: 1T, 4L
This course introduces the student to methods of identifying paint defects, causes, cures, and final detailing. The student will learn to troubleshoot and correct paint imperfections.
|
| |
-
ABR 281 - Special Topics in Auto Body
3 Hours: 6L
This course is guided independent study in special projects to give the student additional training in a specific area selected by the instructor. Emphasis is placed on individual student needs to improve or expand skills. Upon completion, the student should be able to demonstrate skills to meet specific needs.
|
| |
-
ABR 293 - Auto Body Repair CO-OP
3 Hours: 6L
Prerequisite: Instructor approval
This course is designed to provide practical shop experience for advanced students through part-time employment in the collision repair industry. Emphasis is placed on techniques used in collision repair facilities. Upon completion, the student should have gained skills necessary for entry level employment.
|
Automotive Technology |
| |
-
AUM 101 - Fundamentals of Automotive Technology
3 Hours: 1T, 5L
This course provides basic instruction in fundamentals of automotive technology. This is a CORE course.
|
| |
-
AUM 112 - Electrical Fundamentals
3 Hours: 1T, 5 L
This is an introductory course in automotive electrical and electronic systems. Emphasis is placed on troubleshooting and repair of systems, subsystems, and components. This is a CORE course.
|
| |
-
AUM 121 - Braking Systems
3 Hours: 1T, 5L
This course provides instruction in automotive technology and auto mechanics. Emphasis is placed on the practical application of brakes. This is a CORE course.
|
| |
-
AUM 122 - Steering and Suspension
3 Hours: 1T, 5L
This course provides instruction in automotive technology and auto mechanics. Emphasis is placed on the practical application of steering and suspension. This is a CORE course.
|
| |
-
AUM 124 - Automotive Engines
3 Hours: 1T, 5L
Prerequisite or Co-Requisite: AUM 101
This course provides instruction on the operation, design, and superficial repair of automotive engines. Emphasis is placed on understanding the four stroke cycle, intake and exhaust manifolds and related parts, engine mechanical timing components, engine cooling and lubrication system principles and repairs, and basic fuel and ignition operation. This is a CORE course.
|
| |
-
AUM 130 - Drive Train and Axles
3 Hours: 1T, 5L
Prerequisite or Co-Requisite: AUM 101
This course provides basic instruction in automotive drive trains and axles. Emphasis is placed on the understanding and application of basic internal and external operations relating to proper operation and drivability. This is a CORE course.
|
| |
-
AUM 133 - Motor Vehicle Air Conditioning
3 Hours: 1T, 4L
This course provides basic instruction in theory, operation, and repair of automotive heating and air conditioning systems. Emphasis is placed on the understanding and repair of vehicle air conditioning and heating systems, including but not limited to air management, electrical and vacuum controls, refrigerant recovery, and component replacement.
|
| |
-
AUM 181 - Special Topics
1 Hour: 3L
Prerequisite: With Instructor Permission
This course is designed to allow the student to specialize in a particular area of study with minimum instruction in automotive mechanics application and with evaluation at the instructor’s discretion. Emphasis is placed on a topic/project that the student is interested in and may include any related area in automotive mechanics. Upon completion, the student should be able to work with minimum instruction and execute the necessary techniques to finish a live work project of choice.
|
| |
-
AUM 182 - Special Topics
2 Hours: 6L
Prerequisite: With Instructor Permission
This course is designed to allow the student to specialize in a particular area of study with minimum instruction in automotive mechanics application and with evaluation at the instructor’s discretion. Emphasis is placed on a topic/project that the student is interested in and may include any related area in automotive mechanics. Upon completion, the student should be able to work with minimum instruction and execute the necessary techniques to finish a live work project of choice.
|
| |
-
AUM 191 - CO-OP
2 Hours: 10i
Prerequisite: With Instructor Permission
This course constitutes a series wherein the student works on a part-time basis in a job directly related to automotive mechanics. In these courses, the employer evaluates the student’s productivity, and the student submits a descriptive report of his work experiences. Upon completion, the student will demonstrate skills learned in an employment setting.
|
| |
-
AUM 212 - Advanced Electrical and Electronic Systems
3 Hours: 1T, 5L
Prerequisite: AUM 110
This course provides instruction in advanced automotive electrical and electronic systems. Emphasis is placed on advanced troubleshooting and repair of electrical systems, subsystems, and components.
|
| |
-
AUM 220 - Engine Repair II
3 Hours: 1T, 5L
This course provides in-depth instruction concerning internal engine diagnosis; overhaul and repair, including but not necessarily limited to the replacement of timing chains, belts, and gears and the replacement or reconditioning of valve train components, as well as replacement of pistons, connecting rods, piston rings, bearings, lubrication system components, gaskets, and oil seals.
|
| |
-
AUM 224 - Manual Transmission and Transaxle
3 Hours: 1T, 4L
This course covers basic instruction in manual transmissions and transaxles. Emphasis is placed on the understanding and application of basic internal and external operations relating to proper operation and drivability.
|
| |
-
AUM 230 - Auto Transmission and Transaxle
3 Hours: 1T, 4L
This course provides basic instruction in automatic transmissions and transaxles. Emphasis is placed on the comprehension of principles and power flow of automatic transmissions and repairing or replacing internal and external components. This is a CORE course.
|
| |
-
AUM 239 - Engine Performance I
3 Hours: 1T, 5L
This course provides basic instruction in engine performance with emphasis on fuel and ignition systems relating to engine operation. This is a CORE course.
|
| |
-
AUM 244 - Engine Performance and Diagnostics
3 Hours: 1T, 5L
This course provides advanced instruction in engine performance. Emphasis is placed on engine management, computer controls of ignition fuel, and emissions systems relating to engine performance and drivability. This is a CORE course.
|
| |
-
AUM 246 - Automotive Emissions
3 Hours: 1T, 5L
This is an introductory course in automotive emission systems. Emphasis is placed on troubleshooting and repair of systems, subsystems, and components.
|
| |
-
AUM 281 - Special Topics
3 Hours: 9L
Prerequisite: With Instructor Permission
This course is designed to allow the student to specialize in a particular area of study with minimum instruction in automotive mechanics application and with evaluation at the instructor’s discretion. Emphasis is placed on a topic/project that the student is interested in and may include any related area in automotive mechanics. Upon completion, the student should be able to work with minimum instruction and execute the necessary techniques to finish a live work project of his or her choice.
|
| |
-
AUM 291 - CO-OP
3 Hours: 15i
Prerequisite: With Instructor Permission
This course constitutes a series wherein the student works on a part-time basis in a job directly related to automotive mechanics. In this course, the employer evaluates the student’s productivity, and the student submits a descriptive report of his work experiences. Upon completion, the student will demonstrate skills learned in an employment setting.
|
Basic Study Skills/Personal Development |
| |
-
BSS 090 - Basic Study Skills
3 Hours
This course is designed to introduce the student to the basic skills of studying. The course includes activities such as an assessment through testing of academic/study strengths and weaknesses, general information about effective study techniques, and applications of study techniques for specific courses.
|
| |
-
BSS 118 - College Study Skills
1 Hour
Prerequisite: RDG 085 and ENG 093 or higher placement
This course covers skills and strategies designed to improve study behaviors. Topics include time management, note taking, test taking, memory techniques, active reading strategies, critical thinking, communication skills, learning styles, and other strategies for effective learning. Upon completion, students should be able to apply appropriate study strategies and techniques to the development of an effective study plan.
|
Biology |
| |
-
BIO 101 - Introduction to Biology I
4 Hours
Prerequisite: RDG 085 and ENG 092 or higher placement
Note: Credit toward graduation will not be given for both BIO 101 and BIO 103.
Introduction to Biology I is the first of a two-course sequence designed for non-science majors. It covers historical studies illustrating the scientific method, cellular structure, bioenergetics, cell reproduction, Mendelian and molecular genetics, and a survey of human organ systems. A 120 minute laboratory is required.
|
| |
-
BIO 102 - Introduction to Biology II
4 Hours
Prerequisite: A letter grade of C or higher in BIO 101
Introduction to Biology II is the second of a two-course sequence for non-science majors. It covers evolutionary principles and relationships, environmental and ecological topics, classification, and a survey of biodiversity. A 120 minute laboratory is required. (Online Only)
|
| |
-
BIO 103 - Principles of Biology I
4 Hours
Prerequisite: RDG 085 and ENG 092 or higher placement
Note: Credit toward graduation will not be given for both BIO 101 and 103.
This is an introductory course for science and non-science majors. It covers physical, chemical, and biological principles common to all organisms. These principles are explained through a study of cell structure and function, cellular reproduction, basic biochemistry, cell energetics, the process of photosynthesis, and Mendelian and molecular genetics. Also included are the scientific method, basic principles of evolution, and an overview of the diversity of life with emphasis on viruses, prokaryotes, and protists. A 120 minute laboratory is required.
|
| |
-
BIO 104 - Principles of Biology II
4 Hours
Prerequisite: A letter grade of C or higher in BIO 103
This course is an introduction to the basic ecological and evolutionary relationships of plants and animals as well as a survey of plant and animal diversity including classification, morphology, physiology, and reproduction. A180 minute laboratory is required. This is a CORE course.
|
| |
-
BIO 120 - Medical Terminology
3 Hours
Prerequisite: RDG 085 and ENG 092 or higher placement
This course is a survey of words, terms, and descriptions commonly used in medical arts. Emphasis is placed on spelling, pronunciation, and meanings of prefixes, suffixes, and roots. No laboratory is required.
|
| |
-
BIO 150 - Human Biology
3 Hours
Prerequisite: RDG 085 and ENG 092 or higher placement
This course introduces the human body with emphasis on structure, function, and pathology. No laboratory is required.
|
| |
-
BIO 201 - Human Anatomy and Physiology I
4 Hours
Prerequisite: A letter grade of C or higher in BIO 103
Note: BIO 201 cannot be used for Area III credit for the AA and AS degrees.
Human Anatomy and Physiology I covers the structure and function of the human body. Included is an orientation of the human body; basic principles of chemistry; a study of cells and tissues; metabolism; joints; the integumentary, skeletal, muscular, and nervous systems; and the senses. Dissection, histological studies, and physiology are featured in the laboratory experience. A 120 minute laboratory is required.
|
| |
-
BIO 202 - Human Anatomy and Physiology II
4 Hours
Prerequisite: BIO 103 with a letter grade of C or higher and BIO 201 with a letter grade of C or higher
Note: BIO 202 cannot be used for Area III credit for the AA and AS degrees.
Human Anatomy and Physiology II covers the structure and function of the human body. Included is a study of basic nutrition; basic principles of water, electrolyte, and acid-base balance; as well as the endocrine, respiratory, digestive, excretory, cardiovascular, lymphatic, and reproductive systems. Dissection, histological studies, and physiology are featured in the laboratory experience. A 120 minute laboratory is required.
|
| |
-
BIO 220 - General Microbiology
4 Hours
Prerequisite: BIO 103 with a letter grade of C or higher and BIO 201 and BIO 202 with a letter grade of C or higher (Additionally, four (4) semester hours of chemistry is recommended.)
This course includes historical perspectives, cell structure and function, microbial genetics, infectious diseases, immunology, distribution, physiology, culture, identification, classification, and disease control of microorganisms. The laboratory experience includes micro-techniques, distribution, culture, identification, and control. Two120 minute laboratories are required.
|
| |
Page: 1
| 2
| 3
| 4
| 5
| 6
| 7
| 8
|
Print this Page