Mar 28, 2024  
2021-2022 College Catalog 
    
2021-2022 College Catalog [ARCHIVED CATALOG]

Course Descriptions


T = Theory (Instruction via lecture, recitation, discussion, demonstration, or seminar.)
L = Laboratory (Practical Application)
C = Clinical

 

Air Conditioning

  
  • ACR 111 - Principles of Refrigeration


    3 Hours

    This course emphasizes the fundamental principles for air conditioning and refrigeration. Instruction is provided in the theory and principles of refrigeration and heat transfer; HVACR system components; common and specialty tools for HVACR; and application of the concepts of basic compression refrigeration. Upon completion, the student should identify system components and understand their functions, identify and use common and specialty HVACR tools, and maintain components of a basic compression refrigeration system.
  
  • ACR 112 - HVACR Service Procedures


    3 Hours

    This course covers system performance checks and refrigerant cycle diagnosis. Emphasis is placed on the use of refrigerant recovery/recycle units, industry codes, refrigerant coils, and correct methods of charging and recovering refrigerants. Upon completion, the student should be able to properly recover/recycle refrigerants and demonstrate safe, correct service procedures which comply with the no-venting laws.
  
  • ACR 113 - Refrigeration Piping Practices


    3 Hours

    This course introduces students to the proper installation procedures of refrigerant piping and tubing for the heating, ventilation, air conditioning, and refrigeration industry. This course includes various methods of working with and joining tubing. Upon completion, the student should understand related terminology and be able to identify ACR pipe, tubing, and various fittings.
  
  • ACR 120 - Fundamentals of Electric Heating Systems


    3 Hours

    This course covers the fundamentals of electric furnace systems. Emphasis is placed on components, general service procedures, and basic installation. Upon completion, students should be able to install and service electric furnaces, heat pumps, and solar and hydronics systems.
  
  • ACR 121 - Principles of Electricity for HVACR


    3 Hours

    This course is designed to provide the student with the basic knowledge of electrical theory and circuitry as it pertains to air conditioning and refrigeration. This course emphasizes safety, definitions, symbols, laws, circuits, and electrical test instruments. Upon completion, the student should understand and be able to apply the basic principles of HVACR circuits and circuit components.
  
  • ACR 122 - HVACR Electric Circuits


    3 Hours

    This course provides the student with advanced applications of electrical circuits and diagrams. The student constructs a variety of wiring diagrams commonly found in HVACR electrical systems. Upon completion, the student should understand standard wiring diagrams and symbols and be able to construct various types of electrical circuits.
  
  • ACR 123 - HVACR Electrical Components


    3 Hours

    During this course students learn characteristics and operations of various electrical components and controls. Emphasis is placed on the operation of motors, relays, contactors, starters, and other HVACR electrical components. Upon completion, the student should be able to install various electrical components and determine their proper operation.
  
  • ACR 125 - Fundamentals of Gas and Electrical Heating Systems


    6 Hours

    This course provides instruction in general service and installation for common gas and electrical heating systems. Emphasis is placed on components, general service procedures, and basic installation. Upon completion, the student should be able to install and service gas and electrical heating systems in a wide range of applications.
  
  • ACR 127 - HVACR Electric Motors and Components


    3 Hours

    This course covers the basic maintenance of electric motors used in HVAC/R systems. Topics include types of motors, motor operations, motor installation, and troubleshooting motors. Upon completion students should be able to install and service HVAC/R electric motors.
  
  • ACR 128 - Heat Load Calculations


    3 Hours

    This course focuses on heat flow into and out of buildings. Emphasis is placed on determining heat gain/heat loss of a given structure. Upon completion, students should be able to calculate heat load and determine HVAC equipment size requirements.
  
  • ACR 132 - Residential Air Conditioning


    3 Hours

    This course introduces students to residential air conditioning systems. Emphasis is placed on the operation, service, and repair of residential air conditioning systems. Upon completion, the student should be able to service and repair residential air conditioning systems.
  
  • ACR 134 - Ice Machines


    3 Hours

    This course introduces students to commercial ice machines. Emphasis is placed on components, electrical and mechanical operation sequences, control adjustment procedures, preventive maintenance, repairs, and installation procedures. Upon completion, student should be able to install, service and repair commercial ice machines.
  
  • ACR 135 - Mechanical/Gas/Safety Codes


    3 Hours

    This course is to enhance the student’s knowledge of the International Fuel Gas Code and International Mechanical Code as well as fire and job safety requirements. Emphasis is placed on code book content and compliance with installation requirements. Upon completion, students should be able to apply code requirements to all work.
  
  • ACR 138 - Customer Relation in HVAC


    3 Hours

    This course covers the basic aspects of customer relations needed be the HVAC technician. Topics include employability skills associated with job performance, record keeping, service invoices, certification requirements, local ordinances, and business ethics. Upon completion, students should be able to get a job and keep it.
  
  • ACR 144 - Basic Drawing and Blueprint Reading in HVAC


    3 Hours

    This course covers basic drawing and blueprint reading as applied to the HVAC industry. Emphasis is on three-view drawings, basic duct systems, and isometric piping. Upon course completion, students should be able to perform basic drawings related to HVAC systems and read pertinent blueprints.
  
  • ACR 147 - Refrigeration Transition and Recovery


    3 Hours

    This course is EPA-approved and covers material relating to the requirements necessary for Type I, II, III, and universal certification. Upon completion, the student should be prepared to take the EPA 608 certification exam.
  
  • ACR 148 - Heat Pump Systems I


    3 Hours

    Instruction received in this course centers around the basic theory and application of heat pump systems and components.  Upon completion students will be able to install and service heat pumps in a wide variety of applications. 
  
  • ACR 149 - Heat Pump Systems II


    3 Hours

    This is a continuation course of the basic theory and application of heat pump systems. Topics include the electrical components of heat pumps and their function. Upon completion student should be able to install and service heat pumps. 
  
  • ACR 181 - Special Topics in Air Conditioning and Refrigeration


    3 Hours

    This course provides specialized instruction in various areas related to the air conditioning and refrigeration industry.
  
  • ACR 192 - HVAC Apprenticeship/Internship


    3 Hours

    This course is designed to provide basic hands-on experiences in the work place. The student is provided with a training plan developed by the employer and instructor working together to guide the learning experience. Upon course completion, students should be able to work independently and apply related skills and knowledge. This course involves a minimum of 15 work hours weekly.
  
  • ACR 200 - Review for Contractors Exam


    3 Hours

    This course prepares students to take the State Certification Examination. Emphasis is placed on all pertinent codes, piping procedures, duct design, load calculation, psychometrics, installation procedures, and air distribution. Upon completion, students should be prepared to take the contractors exam.
  
  • ACR 203 - Commercial Refrigeration


    3 Hours

    This course focuses on commercial refrigeration systems. Emphasis is placed on evaporators, condensers, compressors, expansion devices, special refrigeration components and application of refrigeration systems. Upon completion students should be able to service and repair commercial refrigeration systems.
  
  • ACR 205 - System Sizing and Air Distribution


    3 Hours

    This course provides instruction in the load calculation of a structure and system sizing. Topics of instruction include heat loss, heat gain, equipment and air distribution sizing, and factors making acceptable indoor air quality. Upon course completion, students should be able to calculate system requirements.
  
  • ACR 210 - Troubleshooting HVACR Systems


    3 Hours

    This course provides instruction in the use of various meters and gauges used in the HVACR industry.  Emphasis is placed on general service procedures, system diagnosis, and corrective measure, methods of leak detection, and system evacuation, charging and performance checks.  Upon completion students should be able to perform basic troubleshooting of HVAC/R.

Anthropology

  
  • ANT 200 - Introduction to Anthropology


    3 Hours

    Prerequisite: ENR 098  with grade of C or higher placement
    This course is a survey of the physical, social, and cultural development and behavior of human beings.
  
  • ANT 210 - Physical Anthropology


    3 Hours

    Prerequisite: ENR 098  with grade of C or higher placement
    This course is a study of the human evolution based upon fossil and archaeological records, as well as analysis of the variation and distribution of contemporary human populations.
  
  • ANT 220 - Cultural Anthropology


    3 Hours

    Prerequisite: ANT 200 
    This course is the application of the concept of culture to the study of both primitive and modern society.
  
  • ANT 226 - Culture and Personality


    3 Hours

    Prerequisite: ANT 200  
    This course explores the relationship between personality development and culture from a cross-cultural perspective.
  
  • ANT 230 - Introduction to Archaeology


    3 Hours

    Prerequisite: ENR 098  with grade of C or higher placement  
    This course is an introduction to archaeological excavation techniques and post-excavation laboratory procedures.

Art

  
  • ART 100 - Art Appreciation


    3 Hours

    Prerequisite: None
    This course is an introduction to the appreciation of art through an examination of the themes and purposes of art, the exploration of visual arts media and methods, and culturally significant works of art from the past and present.  The course informs students about the language of art and its relevance in everyday life.
  
  • ART 109 - Art Museum Survey


    3 Hours

    This course covers the art experienced through supervised visits to museums and art galleries. Emphasis is placed on learning through critical study. Upon completion, the student should be able to write a critical analysis of the art work experienced that demonstrates an understanding of aesthetics.
  
  • ART 113 - Drawing I


    3 Hours

    This course provides the opportunity to develop perceptional and technical skills in a variety of media. Emphasis is placed on communication through experimenting with composition, subject matter, and technique.
  
  • ART 114 - Drawing II


    3 Hours

    Prerequisite: ART 113 .
    This course advances the students drawing skills in various art media. Emphasis is placed on communication through experimentation, composition, technique, and personal expression.
  
  • ART 121 - Two-Dimensional Composition I


    3 Hours

    This course introduces the basic of concepts of two-dimensional design. Topics include the elements of art and principles of design with emphasis on the arrangements and relationships among them.
  
  • ART 127 - Three-Dimensional Composition


    3 Hours

    Prerequisite: ART 113  or ART 121 .
    This course introduces art materials and principles of design that acquaint the beginner with the fundamentals of three-dimensional art. Emphasis is placed on the use of art fundamentals and the creative exploration of materials in constructing three-dimensional art works.
  
  • ART 143 - Crafts II


    3 Hours

    This course is an introduction to various creative crafts, which may include work with fibers, metal, glass, or other media. Emphasis is placed on processes, techniques, materials, and creative expression. Upon completion, the student should be able to demonstrate creative uses of materials, knowledge of the fundamentals of art, and an understanding of craftsmanship and aesthetic quality.
  
  • ART 173 - Photography I


    3 Hours

    Note: A 35mm single-lens reflex camera is required.
    This course is an introduction to the art of photography. Emphasis is placed on the technical and aesthetic aspects of photography with detailed instruction in darkroom techniques. Upon completion, students should understand the camera as a creative tool, understand the films, chemicals and papers, and have a knowledge of composition and history.
  
  • ART 174 - Photography II


    3 Hours

    Prerequisite: ART 173 
    Note: A 35mm single-lens reflex camera is required.
    This course advances the students’ technical and aesthetic knowledge of photography beyond the introductory level. Emphasis is placed on photographic composition and darkroom techniques as a means of communication. Upon completion, the student should demonstrate creative and communication skills through the photographic process.
  
  • ART 175 - Digital Photography


    3 Hours

    Note: The student needs a digital single-lens reflex camera.
    This course introduces student to digital imaging techniques. Emphasis is placed on the technical application of the camera, digital photographic lighting methods, and overall composition. Upon completion, students should be able to take digital images and understand the technical aspects of producing high quality photos.
  
  • ART 180 - Introduction to Graphic Design


    3 Hours

    This course is a general introduction to graphic design. Topics include history, processes, and production design. Upon completion, the student should understand the concepts used to create media graphics.
  
  • ART 203 - Art History I


    3 Hours

    Prerequisite: ENR 098  with grade of C or higher placement  
    This course covers the chronological and global development of different forms of visual art, such as sculpture, painting, and architecture. Emphasis is placed on art history from the ancient period through the Middle Ages.
  
  • ART 204 - Art History II


    3 Hours

    Prerequisite: ENR 098  with grade of C or higher placement  
    This course covers the chronological and global development of different forms of visual art, such as sculpture, painting, and architecture. Emphasis is placed on art history from the Renaissance to the present. 
  
  • ART 231 - Watercolor Painting I


    3 Hours

    Prerequisite: ART 113  or ART 121 
    This course introduces materials and techniques appropriate to painting on paper with water-based medium. Emphasis is placed on developing the technical skills and the expressive qualities of watercolor painting. Upon completion, the student should be able to demonstrate a basic proficiency in handling the techniques of watercolor and how it can be used for personal expression.
  
  • ART 232 - Watercolor Painting II


    3 Hours

    Prerequisite: ART 231 
    This course advances the skills and techniques of painting on paper using water-based medium. Emphasis is placed on exploring the creative uses of watercolor and developing professional skills. Upon completion, the student should demonstrate and compile a body of original paintings reflecting a personal awareness of the media’s potential.
  
  • ART 233 - Painting I


    3 Hours

    This course is designed to introduce the student to fundamental painting processes and materials. Topics include art fundamentals, color theory, and composition.
  
  • ART 234 - Painting II


    3 Hours

    Prerequisite: ART 233 
    This course is designed to develop the student’s knowledge of the materials and procedures of painting beyond the introductory level. Emphasis is placed on the creative and technical problems associated with communicating through composition and style. Upon completion, the student should be able to demonstrate the application of the fundamentals of painting and the creative process to the communication of ideas.
  
  • ART 243 - Sculpture I


    3 Hours

    Prerequisite: ART 125 or ART 127 
    This course provides a study of three-dimensional form by familiarizing students with sculpting media and techniques. Topics include the fundamentals of art and sculpting media with emphasis on the creative process. Upon completion, the student should understand the fundamentals of art and three-dimensional form, as well as the various media and processes associated with sculpture.
  
  • ART 244 - Sculpture II


    3 Hours

    Prerequisite: ART 243 
    This course is designed to sharpen the student’s skills in the media and processes of sculpture. Emphasis is placed on personal expression through three-dimensional form. Upon completion, the student should be able to apply the fundamentals of art, knowledge of form, and the sculptural processes to communicating ideas.
  
  • ART 253 - Graphic Design I


    3 Hours

    This course is designed to introduce the study of visual communication through design. Emphasis is placed on the application of design principles to projects involving such skills as illustration, layout, typography and production technology. Upon completion, students should demonstrate a knowledge of the fundamentals of art and understanding of the relationship between materials, tools and visual communication.
  
  • ART 275 - Advanced Digital Photography


    3 Hours

    Prerequisite: ART 175 
    This course explores various uses of digital photography. Subject areas may include studio, portrait, and landscape photography. Upon completion, the student should be able to apply the techniques necessary to produce professional photographs of a variety of subjects.
  
  • ART 291 - Supervised Study in Studio Art I


    1-4 Hours

    Prerequisite: Permission of instructor
    This course is designed to enable the student to continue studio experiences in greater depth. Topics are to be chosen by the student with the approval of the instructor. Upon completion, the student should have a greater expertise in a particular area of art.
  
  • ART 292 - Supervised Study in Studio Art II


    3 Hours

    Prerequisite: ART 291 
    This course is designed to enable the student to continue studio experiences in greater depth. Topics are to be chosen by the student with the approval of the instructor. Upon completion, the student should have greater expertise in a particular area of art.

Astronomy

  
  • AST 220 - Introduction to Astronomy


    4 Hours

    Prerequisite: ENR 098  with grade of C or higher placement  
    This course covers the history of astronomy and the development of astronomical thought leading to the birth of modern astronomy and its most recent developments. Emphasis is placed on the coverage of astronomical instruments and measuring technologies, the solar system, the Milky Way galaxy, important extra-galactic objects, and cosmology. Laboratory is required.

Automotive Manufacturing Technology

  
  • AUT 102 - Lean Manufacturing and Industrial Safety


    3 Hours

    This course will introduce students to manufacturing fundamentals.  It introduces various tools and techniques typically used in Lean manufacturing.  It also will provide Occupational Safety and Health Administration (OSHA) certification instruction.  OSHA standards will include electrical, Lock Out/ Tag Out, hazardous communications, personal protective equipment, machine guarding, and walking and working surfaces.
  
  • AUT 104 - Blueprint Reading for Manufacturing


    3 Hours

    This course provides the students with terms and definitions, theory of orthographic projection, and other information required to interpret drawings used in the manufacturing and industrial trade areas. Topics include multiview projection, pictorial drawings, dimensions and notes, lines and symbols, tolerances, industrial applications, scales and quality requirements. Upon completion, students should be able to interpret blueprint drawings used in the manufacturing and industrial trades. This course may be tailored to meet specific local industry needs. 
  
  • AUT 144 - Manufacturing Systems, Methods, and Processes


    3 Hours

    This course provides an introduction to the common types of Manufacturing Systems and Manufacturing Support Systems, Production Operations, Facilities, Product/Production Relationships, while highlighting the philosophy of Lean Manufacturing and Just-in-Time (JIT) Manufacturing.  This includes an introduction to Production Performance indicators including Safety, Quality, Delivery, Cost, and Morale (SQCDM).  Automated techniques covering robotics, automated inspection, material handling, and logistics/ID systems will be examined.  Common types of Manufacturing Systems (single station, assembly lines, automated production lines, automated assembly lines, cellular, and flexible manufacturing) will be studied.  Coverage of Manufacturing Support Systems will include an overview of product design, process planning, and production planning/control.  Students will be prepared to analyze production processes resulting in operational standards, including cycle time analysis to meet tact times.
  
  • AUT 145 - Introduction to Injection Molding


    3 Hours

    Students learn the fundamentals of injection molding operations, including molding terminology, machine part identification, operating safety, machine controls and machine startup and shutdown. Students are taught to identify common part defects such as short shots, flash, warp, surface defects, color changes and shrinkage. Students learn the properties of commonly used molding materials.
  
  • AUT 146 - Introduction to Injection Molding Lab


    3 Hours

    Students learn to safely operate an injection molding machine. Students learn to properly startup, set machine controls and shutdown a molding machine.
  
  • AUT 155 - Metrology


    3 Hours

    This course covers the use of precision measuring instruments. Emphasis is placed on the inspection of machine parts and use of a wide variety of measuring instruments.  Upon completion students should be able to demonstrate correct use of measuring instruments.  This course is aligned with NIMS certification standards. 
  
  • AUT 173 - Injection Mold Setter Skills


    3 Hours

    This course is designed to teach students basic mold setter skills.  They will learn the fundamentals of injection molding operations, including molding terminology, machine part identification, operating safety, machine controls and machine startup and shutdown. Students are taught to identify common part defects such as non-fill, burn marks, warpage, discoloration, weld lines, and flash.  At the end of this course students should be able to safely work as a mold setter.
  
  • AUT 175 - Injection Mold Setter Skills Lab


    3 Hours

    This course is designed to teach students basic mold setter skills in a laboratory environment.  It is a companion course for AUT/MTT/MSP 173.  The students will learn the practical application of injection molding operations, including molding terminology, machine part identification, operating safety, machine controls and machine startup and shutdown. Students are taught to identify and correct common part defects such as non-fill, burn marks, warpage, discoloration, weld lines, and flash.  At the end of this course students should be able to safely work as a mold setter.
  
  • AUT 200 - Total Productive Maintenance


    2 Hours

    This course will provide students with the knowledge to do preventive maintenance on automation systems.  Also assess tooling, inspect and perform preventive maintenance on various tools.  The course provides both classroom and performance based hands on training to inform personnel on preventive maintenance.
  
  • AUT 273 - Injection Mold Processing


    3 Hours

    This course is designed to teach student basic injection mold processor skills.  Topics will include safety, molding materials, machine controls, fill rates, temperature control, pressure control, and timing.  Students will learn how various factors affect the injection mold process and how to compensate for those factors by setting and adjusting machine controls.
  
  • AUT 275 - Injection Mold Processing Lab


    3 Hours

    This course is designed to teach students basic injection mold processor skills in a laboratory environment.  It is a companion course for AUT/MTT/MSP 273.  The students will learn the practical application of injection mold processes including safety, molding materials, machine controls, fill rates, temperature control, pressure control, and timing.  Students will learn how various factors affect the injection mold process and how to compensate for those factors by setting and adjusting machine controls

Automotive Service Technology

  
  • AUM 101 - Fundamentals of Automotive Technology


    3 Hours

    This course provides basic instruction in fundamentals of automotive technology.
  
  • AUM 112 - Electrical Fundamentals


    3 Hours

    This course introduces the principles and laws of electricity. Emphasis is placed on wiring diagrams, test equipment, and identifying series, parallel and series-parallel circuits. Upon completion, students should be able to calculate, build, and measure circuits.
  
  • AUM 121 - Braking Systems


    3 Hours

    This course provides instruction in automotive technology and auto mechanics. Emphasis is placed on the practical application of brakes.
  
  • AUM 122 - Steering and Suspension


    3 Hours

    This course provides instruction in automotive technology and auto mechanics. Emphasis is placed on the practical application of steering and suspension.
  
  • AUM 124 - Automotive Engines


    3 Hours

    Prerequisite or Co-Requisite: AUM 101  
    This course provides instruction on the operation, design, and superficial repair of automotive engines. Emphasis is placed on understanding the four stroke cycle, intake and exhaust manifolds and related parts, engine mechanical timing components, engine cooling and lubrication system principles and repairs, and basic fuel and ignition operation.
  
  • AUM 127 - Car Braking, Steering, and Suspensions Systems


    3 Hours

    This course provides instruction in automotive technology or auto mechanics.  Emphasis is placed on the practical application maintenance and repair of brakes, steering, and suspensions systems. 
  
  • AUM 130 - Drive Train and Axles


    3 Hours

    This course provides basic instruction in automotive drive trains and axles. Emphasis is placed on the understanding and application of basic internal and external operations relating to proper operation and drivability.
  
  • AUM 133 - Motor Vehicle Air Conditioning


    3 Hours

    This course provides basic instruction in theory, operation, and repair of automotive heating and air conditioning systems. Emphasis is placed on the understanding and repair of vehicle air conditioning and heating systems, including but not limited to air management, electrical and vacuum controls, refrigerant recovery, and component replacement.
  
  • AUM 162 - Electrical and Electronic Systems


    3 Hours

    Prerequisite: AUM 112  
    This is an intermediate course in automotive electrical and electronic systems.  Emphasis is placed on troubleshooting and repair of battery, starting, charging, and lighting systems, subsystems, and components. 
  
  • AUM 171 - Co-Op


    1 Hour

    Prerequisite: With Instructor Permission
    These courses constitute a series wherein the student works on a part-time basis in a job directly related to automotive mechanics. In these courses the employer evaluates the student’s productivity and the student submits a descriptive report of his work experiences. Upon completion, the student will demonstrate skills learned in an employment setting.
  
  • AUM 173 - Co-Op


    1 Hour

    Prerequisite: With Instructor Permission
    These courses constitute a series wherein the student works on a part-time basis in a job directly related to automotive mechanics. In these courses the employer evaluates the student’s productivity and the student submits a descriptive report of his work experiences. Upon completion, the student will demonstrate skills learned in an employment setting.
  
  • AUM 175 - Co-Op


    1 Hour

    Prerequisite: With Instructor Permission
    These courses constitute a series wherein the student works on a part-time basis in a job directly related to automotive mechanics. In these courses the employer evaluates the student’s productivity and the student submits a descriptive report of his work experiences. Upon completion, the student will demonstrate skills learned in an employment setting.
  
  • AUM 181 - Special Topics


    1 Hour

    Prerequisite: With Instructor Permission
    This course is designed to allow the student to specialize in a particular area of study with minimum instruction in automotive mechanics application and with evaluation at the instructor’s discretion. Emphasis is placed on a topic/project that the student is interested in and may include any related area in automotive mechanics. Upon completion, the student should be able to work with minimum instruction and execute the necessary techniques to finish a live work project of choice.
  
  • AUM 191 - CO-OP


    2 Hours

    Prerequisite: With Instructor Permission
    This course constitutes a series wherein the student works on a part-time basis in a job directly related to automotive mechanics. In these courses, the employer evaluates the student’s productivity, and the student submits a descriptive report of his work experiences. Upon completion, the student will demonstrate skills learned in an employment setting.
  
  • AUM 212 - Advanced Electrical and Electronic Systems


    3 Hours

    Prerequisite: AUM 112  AUM 162  
    This course provides instruction in advanced automotive electrical and electronic systems. Emphasis is placed on advanced troubleshooting and repair of electrical systems, subsystems, and components.
  
  • AUM 220 - Advanced Automotive Engines


    3 Hours

    Prerequisite: AUM 124  
    This course provides in-depth instruction concerning internal engine diagnosis; overhaul and repair, including but not necessarily limited to the replacement of timing chains, belts, and gears and the replacement or reconditioning of valve train components, as well as replacement of pistons, connecting rods, piston rings, bearings, lubrication system components, gaskets, and oil seals.
  
  • AUM 224 - Manual Transmission and Transaxle


    3 Hours

    Prerequisite: AUM 239  
    This course covers basic instruction in manual transmissions and transaxles. Emphasis is placed on the understanding and application of basic internal and external operations relating to proper operation and drivability.
  
  • AUM 230 - Auto Transmission and Transaxle


    3 Hours: 1T, 2L

    Prerequisite: AUM 130  
    This course provides basic instruction in automatic transmissions and transaxles. Emphasis is placed on the comprehension of principles and power flow of automatic transmissions and repairing or replacing internal and external components.
  
  • AUM 235 - Transmissions and Transaxles


    3 Hours

    This course covers basic instruction in manual and automatic transmissions and transaxles.  Emphasis is placed on the understanding and application of basic internal and external operation relating to proper operation and drivability.  Instruction includes the principles and power flow of automatic transmissions and repairing or replacing internal and external components.  
  
  • AUM 239 - Engine Performance I


    3 Hours

    Prerequisite: AUM 112  and AUM 124  
    This course provides basic instruction in engine performance with emphasis on fuel and ignition systems relating to engine operation.
  
  • AUM 244 - Engine Performance and Diagnostics


    3 Hours

    Prerequisite: AUM 239  
    This course provides advanced instruction in engine performance. Emphasis is placed on engine management, computer controls of ignition fuel, and emissions systems relating to engine performance and drivability.
  
  • AUM 246 - Automotive Emissions


    3 Hours

    This is an introductory course in automotive emission systems. Emphasis is placed on troubleshooting and repair of systems, subsystems, and components.
  
  • AUM 248 - Engine Performance, Diagnostics and Emissions


    3 Hours 1T 2L

    Prerequisite: AUM 101  AUM 112  AUM 124  
    This course provides advanced instruction on engine performance to include engine management, computer controls of ignition, fuel, and emission systems relating to engine performance and drivability. Instruction includes troubleshooting and repair of systems, subsystems, and components. 
  
  • AUM 250 - Hybrid and Electric Vehicle


    3 Hours

    This course is designed to measure a technician’s knowledge of the skills needed to diagnose both high and low voltage electrical/electronic problems, as well as other supporting system problems on hybrid/electric vehicles.  This course prepares students for the ASE Light Duty Hybrid/Electric Vehicle Specialist (L3) certification. 
  
  • AUM 271 - Co-Op


    1 Hour

    Prerequisite: With Instructor Permission
    These courses constitute a series wherein the student works on a part-time basis in a job directly related to automotive mechanics. In these courses the employer evaluates the student’s productivity and the student submits a descriptive report of his work experiences. Upon completion, the student will demonstrate skills learned in an employment setting.
  
  • AUM 273 - Co-Op


    1 Hour

    Prerequisite: With Instructor Permission
    These courses constitute a series wherein the student works on a part-time basis in a job directly related to automotive mechanics. In these courses the employer evaluates the student’s productivity and the student submits a descriptive report of his work experiences. Upon completion, the student will demonstrate skills learned in an employment setting.
  
  • AUM 275 - Co-Op


    1 Hour

    Prerequisite: With Instructor Permission
    These courses constitute a series wherein the student works on a part-time basis in a job directly related to automotive mechanics. In these courses the employer evaluates the student’s productivity and the student submits a descriptive report of his work experiences. Upon completion, the student will demonstrate skills learned in an employment setting.
  
  • AUM 281 - Special Topics


    3 Hours

    Prerequisite: With Instructor Permission
    This course is designed to allow the student to specialize in a particular area of study with minimum instruction in automotive mechanics application and with evaluation at the instructor’s discretion. Emphasis is placed on a topic/project that the student is interested in and may include any related area in automotive mechanics. Upon completion, the student should be able to work with minimum instruction and execute the necessary techniques to finish a live work project of his or her choice.
  
  • AUM 291 - CO-OP


    3 Hours

    Prerequisite: With Instructor Permission
    This course constitutes a series wherein the student works on a part-time basis in a job directly related to automotive mechanics. In this course, the employer evaluates the student’s productivity, and the student submits a descriptive report of his work experiences. Upon completion, the student will demonstrate skills learned in an employment setting.
  
  • AUM 293 - Automotive Technology Co-Op


    3 Hours

    Prerequisite: With Instructor Permission
    These courses constitute a series wherein the student works on a part-time basis in a job directly related to automotive mechanics. In these courses the employer evaluates the student’s productivity and the student submits a descriptive report of his work experiences. Upon completion, the student will demonstrate skills learned in an employment setting.

Barbering

  
  • BAR 108 - Introduction to Barbering


    3 Hours

    Co-Requisite: BAR 111  
    This course provides an orientation to professional barber styling. Topics include learning skills, history of barbering, professional image, microbiology, safety, infection control, implements and tools, razor shaving properties and disorders of hair and scalp, and the treatment of hair.
  
  • BAR 111 - Introduction to Barbering Lab


    3 Hours

    Co-Requisite: BAR 108  
    This course provides practical application of barber-styling fundamentals. Emphasis is placed on safety, infection control, the use and care of implements, treatment of hair, and razor shaving. Upon completion, the student will demonstrate proper infection control, hair care, and use of implements.
  
  • BAR 112 - Science of Barbering


    3 Hours

    Prerequisite: BAR 124  
    Co-Requisite: BAR 113  
    This course introduces the student to the basic science of barber-styling. Topics include anatomy/physiology, disorders and treatments of the skin, scalp, and hair, and theory of facial and scalp massage. Upon completion, the student should be familiar with the anatomical structures, as well as disorders and treatments of the skin, scalp, and hair.
  
  • BAR 113 - Fundamentals of Barbering Applications


    3 Hours

    Prerequisite: BAR 124  
    Co-Requisite: BAR 112  
    This course provides practical application of barber fundamentals learned in earlier courses. Emphasis is placed on safety, facial massage, treatment of hair and scalp proper use and care of implements, shampooing and haircutting, and razor shaving. Upon completion, the student should be able to perform fundamental barbering techniques with limited supervision.
  
  • BAR 114 - Barber Styling Lab


    3 Hours:

    Prerequisite or Co-Requisite: BAR 108  and BAR 111  
    This course provides students with the opportunity to demonstrate skills in hair care, hair cutting, and facial massage. Emphasis is placed on safety and infection control.   
  
  • BAR 115 - Cutting and Styling Techniques


    3 Hours

    Prerequisite or Co-Requisite: BAR 112  and BAR 113  
    Co-Requisite: BAR 140  
    This course provides practical experience in basic scissor and clipper haircutting. Upon completion, the student will be able to cut and style a client’s hair, demonstrating correct scissor and clipper cutting and styling techniques.
 

Page: 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9