|
|
2017-2018 College Catalog [ARCHIVED CATALOG]
Course Descriptions
|
|
|
T = Theory (Instruction via lecture, recitiation, discussion, demonstration, or seminar.)
L = Laboratory (Practical Application)
C = Clinical
|
| |
Culinary Arts/Chef Training |
| |
-
CUA 208 - Advanced Baking
3 Hours: 1T, 2L
Prerequisite: CUA 204
This course is a continuation of CUA 204 . Topics include specialty breads, pastillage, marzipan, chocolate, pulled-sugar, confections, classic desserts, pastries, and cake decorating. Upon completion, the student should be able to demonstrate pastry preparation and plating, cake decorating, and show-piece production skills.
|
| |
-
CUA 210 - Beverage Management
2 Hours: 2T
This is a survey course of basic alcoholic and non-alcoholic beverages as they relate to food service. Topics include wine and food appreciation and laws related to alcohol services. Upon completion, the student should be able to determine what beverages compliment various cuisines and particular tastes.
|
| |
-
CUA 213 - Food Purchasing and Cost Control
3 Hours: 3T
Emphasis is placed on procurement, yield tests, inventory control, specification, planning, forecasting, market trends, terminology, cost controls, pricing, and food service ethics. Upon completion, the student should be able to apply effective purchasing techniques based on the end-use of the product.
|
| |
-
CUA 214 - International Cuisine
3 Hours: 1T, 2L
Prerequisite: CUA 215
This course focuses on various cuisines from countries and regions throughout the world. Students will prepare complete menus reflective of the culture and goods of these countries and regions with emphasis on ingredients and authentic preparation methods. Upon completion, the student should be able to research and execute international menus.
|
| |
-
CUA 215 - Regional Cuisines of The Americas
3 Hours: 1T, 2L
Prerequisite: CUA 125
This course provides a brief history of the ancient American foods enhancing the world’s cuisines. Emphasis is placed on how these foods influenced today’s American cuisine. Upon completion, the student should be able to research and execute regional American cuisines.
|
| |
-
CUA 216 - Plated Dessert Design
3 Hours: 2T, 1L
Prerequisite: CUA 125
This course focuses on plated dessert designs. Emphasis will be placed on complex presentations with two or more main items using decorative garnishes. Upon completion, students should be able to plate and serve attractive presentations of desserts with appropriate sauces and garnishes.
|
| |
-
CUA 220 - Introduction to Patisserie
3 Hours: 1T, 2L
This is an introductory course to patisserie. Emphasis is placed on individual desserts, blown sugars, pulled sugar, pastillage gum paste, and nougat. Upon completion, the student should be able to plan, execute, and evaluate dessert platters, individual plated desserts, and show pieces.
|
| |
-
CUA 251 - Menu Design
3 Hours: 3T
This course introduces menu design. Topics include development of standardized recipes, layout, nutritional concerns, product utilization, demographics, and customer needs. Upon completion, the student will be able to write, lay out, and produce effective menus for a variety of hospitality settings.
|
| |
-
CUA 255 - Field Experience Savory
3 Hours: 3T
A minimum of 200 hours of supervised practical experience in an approved food service system assigned by the Coordinator. Students are supervised jointly by director on the job and by the college instructor. Students gain practical experience in food services. This course may be repeated credit.
|
| |
-
CUA 262 - Restaurant Management and Supervision
3 Hours: 3T
This course introduces restaurant and food service information systems. Topics include planning, cost controls, forecasting, inventory control, recipe control, production control, and nutritional analysis. Upon completion, students should be able to demonstrate competence in utilizing contemporary information application systems in a restaurant setting.
|
| |
-
CUA 271 - Management of Food and Beverage Service
3 Hours: 2T
This course covers the practical skills and knowledge for effective food and beverage service in a variety of settings. Topics include reservations, greeting and service of guests, styles of service, handling of complaints, and sales and merchandising. Upon completion, the student will be able to demonstrate competence in human relations and technical skills required in the service of foods and beverages.
|
Dance |
| |
-
DNC 101 - Dance Appreciation
3 Hours
An introduction to dance though the analysis of historical and contemporary dance forms. Films, demonstrations, and performances are used in this class.
|
| |
-
DNC 110 - Introduction to Dance Styles
2 Hours
This course is an introduction to dance styles.
|
| |
-
DNC 111 - Elementary Modern Dance
2-3 Hours
This is a studio course in modern dance technique at the elementary level.
|
| |
-
DNC 121 - Elementary Ballet
2 Hours
This course is a studio course in classical ballet at the elementary level.
|
| |
-
DNC 140 - Fitness Dance I
1-2 Hours
This course uses dance activity to increase a student’s level of physical fitness. Flexibility exercises and body toning/sculpting exercises, specially designed to develop the dancer’s body, will be used in class.
|
| |
-
DNC 143 - Ballet I
3 Hours
Prerequisite: Previous dance training is essential before taking this course.
This course offers intensive training in classical ballet for students intending to major in dance. Intermediate level technique is studied, emphasizing posture and placement. The student is evaluated on ability to perform the work to the required standard.
|
| |
-
DNC 144 - Ballet II
3 Hours
Prerequisite: Previous dance training is essential before taking this course.
This course offers intensive training in classical ballet for students intending to major in dance. Intermediate level technique is studied, emphasizing posture and placement. The student is evaluated on ability to perform the work to the required standard.
|
| |
-
DNC 160 - Dance Workshop I
1-2 Hours
This course provides practical experience in the production and performance of a dance presentation, including sound, lighting, choreography, rehearsal, costuming, and make-up.
|
| |
-
DNC 161 - Dance Workshop II
1-2 Hours
Prerequisite: DNC 160
This course is a continuation of DNC 160 .
|
| |
-
DNC 234 - Choreography I
1-3 Hours
Students are involved in individual and group choreographic projects in which musical and spatial elements are explored.
|
| |
-
DNC 243 - Ballet III
3 Hours
Prerequisite: DNC 144 or permission of instructor
This course covers ballet technique at an advanced level, emphasizing performance quality, musicality, and classical style.
|
| |
-
DNC 244 - Ballet IV
3 Hours
Prerequisite: DNC 144 or permission of instructor
This course covers ballet technique at an advanced level, emphasizing performance quality, musicality, and classical style.
|
| |
-
DNC 267 - Jazz Dance I
3 Hours
This is the first of a six-course sequence providing the student a study of basic principles and techniques on jazz dance, including an introduction to the varied movement styles and rhythms of this dance form.
|
| |
-
DNC 268 - Jazz Dance II
3 Hours
Prerequisite: DNC 267
This course is a continuation of DNC 267 .
|
Diesel Mechanics |
| |
-
DEM 104 - Basic Engines
3 Hours: 1T, 4L
This course is designed to give the student knowledge of the diesel engine components and auxiliary systems, the proper way to maintain them, and the proper procedures for testing and rebuilding components. Emphasis is placed on safety, theory of operation, inspection, and measuring and rebuilding diesel engines according to factory specifications. Upon completion, the student should be able to measure, diagnose problems, and repair diesel engines. This is a CORE course.
|
| |
-
DEM 105 - Preventive Auxiliary Services
3 Hours: 1T, 4L
This course provides instruction on how to plan, develop, and install equipment surveillance and reliability strategies. Descriptions of various auxiliary services techniques for specialized preventive programs are discussed, and computerized parts and equipment inventories and fleet management systems software are emphasized. Upon completion, the student should be able to set up and follow a preventive auxiliary services schedule as directed by manufacturers.
|
| |
-
DEM 110 - Diesel-Powered Auxiliary Equipment
3 Hours: 1T, 4L
This course provides instruction in diesel-powered auxiliary equipment. Topics include the application of diesel engines to generators, pumps, refrigeration, drilling, boring machines, and marine power units. Upon completion, the student should be able to test, troubleshoot, diagnose, and repair diesel-powered auxiliary equipment.
|
| |
-
DEM 111 - Equipment Safety/Mechanical Fundamentals
3 Hours: 1T, 4L
This course provides instruction in the fundamentals of vehicle operation and safety when basic service work is to be performed in the shop. Topics include service manuals, mechanical fundamentals, preventive auxiliary services, and component adjustment. Upon completion, students should be able to demonstrate knowledge of the fundamentals of vehicle operation and safety in the shop.
|
| |
-
DEM 114 - Fluid Power Components
3 Hours: 2T, 2L
This course is designed to provide the fundamental knowledge of hydraulic and pneumatic components currently in use on mobile as well as stationary equipment. Instruction is provided in the identification and repair of various pumps, motor, valves, heat exchangers, and cylinders. Upon completion, the student should be able to diagnose, service, and repair hydraulic and pneumatic components.
|
| |
-
DEM 116 - Track Vehicle Drive Trains
3 Hours: 1T, 4L
This course provides instruction in track vehicles and drive trains. Emphasis is placed on track frame roller, rail, steering clutch, axle, and driveline building and repair. Upon completion, the student should be able to identify, research specifications, repair, and adjust drive train components.
|
| |
-
DEM 119 - Bearings and Lubricants
3 Hours: 1T, 4L
This course focuses on roller, ball, and shell bearing design and application. Topics include vehicle and industrial bearings and lubrication requirements. Upon completion, the student should be able to diagnose related problems and service and replace bearings.
|
| |
-
DEM 122 - Heavy Vehicle Brakes
3 Hours: 1T, 4L
This course covers the theory and repair of braking systems used in medium and heavy duty vehicles. Topics include air, hydraulic, and ABS system diagnosis and repair. Upon completion, the student should be able to troubleshoot, adjust, and repair braking systems on medium and heavy duty vehicles. This is a CORE course.
|
| |
-
DEM 123 - Pneumatics and Hydraulics
3 Hours: 1T, 2L
This course provides instruction in the identification and repair of components found in hydraulic and pneumatic systems. Topics include schematics and symbols used in fluid power transmission and the troubleshooting of components in these systems. Upon completion, students should be able to diagnose, adjust, and repair hydraulic and pneumatic system components.
|
| |
-
DEM 124 - Electronic Engine Systems
3 Hours: 1T, 4L
This course introduces the principles of electronically-controlled diesel engines. Emphasis is placed on testing and adjusting diesel engines in accordance with manufacturers’ specifications. Upon completion, the student should be able to diagnose, test, and calibrate electronically-controlled diesel engines.
|
| |
-
DEM 125 - Heavy Vehicle Drive Trains
3 Hours: 1T, 4L
This course introduces the operating principles of mechanical medium and heavy duty truck transmissions. Topics include multiple counter shafts, power take-offs, slider idler clutches, friction clutches, mechanical transmission power components, and hydraulics. Upon completion, the student should be able to diagnose, inspect, and repair mechanical transmissions. This is a CORE course.
|
| |
-
DEM 126 - Advanced Engine Analysis
3 Hours: 1T, 4L
This course provides instruction in the disassembly, inspection, and rebuilding of diesel and heavy-duty gas engines. Emphasis is placed on manufacturer standards and factory-recommended service tools and equipment. Upon completion, the student should be able to disassemble, inspect, and rebuild engines according to manufacturer specifications.
|
| |
-
DEM 127 - Fuel Systems
3 Hours: 1T, 4L
This course is designed to provide practice in troubleshooting, fault code diagnosis, information retrieval, calibration, repair, and replacement of fuel injectors, nozzles, and pumps. Emphasis is placed on test equipment, component functions, and theory. Upon completion, the student should be able to diagnose, service, and repair fuel systems and governors. This is a CORE course.
|
| |
-
DEM 129 - Basic Engine Lab
3 Hours: 3L
Co-Requisite: DEM 126
This lab allows the student to refine the skills required to repair diesel engines.
|
| |
-
DEM 130 - Electrical/Electronic Fundamentals
3 Hours: 1T, 4L
This course introduces the student to basic electrical / electronic concepts and fundamentals. It provides the principles of electricity, magnetism, and Ohm’s Law. Emphasis is placed on batteries; starting, charging, and lighting circuits, including series, parallel, and series-parallel circuits. Troubleshooting and repairing of wiring harnesses, starting motors, charging systems, and accessories are included along with the computerized monitoring of vehicle systems. Upon completion, students should be able to identify components, test systems, and repair minor electrical problems according to manufacturer literature. This is a CORE course.
|
| |
-
DEM 134 - Computer-Controlled Engine and Power Train Systems
3 Hours: 3T
This course introduces the student to the fundamentals of operation of computer-controlled engine and power train systems.
|
| |
-
DEM 135 - Heavy Vehicle Steering and Suspension
3 Hours: 1T, 4L
This course introduces the theory and principles of medium and heavy duty steering and suspension systems. Topics include wheel and tire problems, frame members, fifth wheel, bearings, and coupling systems. Upon completion, the student should be able to troubleshoot, adjust, and repair suspension and steering components on medium and heavy duty vehicles.
|
| |
-
DEM 154 - Vehicle Auxiliary Services and Safe Operating Practices
3 Hours: 1T, 4L
This course provides instruction in basic entry level driving skills relating to the auxiliary services and safe operation of a commercial motor vehicle. Topics include preventive auxiliary services and safe vehicle operations. Upon completion, the student should have the skill and knowledge to safely operate a commercial motor vehicle.
|
| |
-
DEM 158 - Pneumatics and Hydraulics II
3 Hours: 2T, 2L
This course provides instruction in the identification and repair of components found in hydraulic systems. Topics include schematics, circuits, and symbols used in fluid power transmission as well as the troubleshooting of components in these systems. Upon completion, the student should be able to diagnose, adjust, and repair hydraulic system components.
|
| |
-
DEM 159 - Heavy Vehicle Drive Trains II
3 Hours: 2T, 1L
This course introduces the operating principles of mechanical medium and heavy duty truck transmissions. Topics include multiple counter shafts, power take-odds, slider idler clutches, friction clutches, mechanical transmission power components, and hydraulics. Upon completion, the student should be able to diagnose, inspect, and repair mechanical transmissions.
|
| |
-
DEM 170 - Heavy Vehicle Air Brakes
3 Hours: 1T, 4L
This course covers the theory and repair of air braking systems used in medium and heavy duty vehicles. Topics include air and ABS system diagnosis and repair. Upon completion, the student should be able to troubleshoot, adjust, and repair air braking systems on medium and heavy duty vehicles.
|
| |
-
DEM 180 - Special Projects in Commercial Vehicles
3 Hours: 3T
This course provides specialized instruction in various areas related to the diesel mechanics industry. Emphasis is placed on meeting student need.
|
| |
-
DEM 181 - Special Topics in Diesel Mechanics
3 Hours: 6L
This course provides specialized instruction in various areas related to the diesel mechanics industry. Emphasis is placed on meeting student need.
|
| |
-
DEM 182 - Special Topics in Diesel Mechanics
3 Hours: 9L
This course provides specialized instruction in various areas related to the diesel mechanics industry. Emphasis is placed on meeting student need.
|
| |
-
DEM 183 - Special Topics in Power Train
3 Hours: 6L
This course provides specialized instruction in various areas related to the power train in the diesel mechanics industry. Emphasis is placed on meeting student need.
|
| |
-
DEM 184 - Special Topics in Heavy Duty Brakes, Steering, and Suspension
3 Hours: 6L
This course provides specialized instruction in various areas related to heavy duty brakes, steering, and suspension systems in the diesel mechanics industry. Emphasis is placed on meeting student need.
|
| |
-
DEM 186 - Special Projects in Commercial Vehicles
3 Hours: 1T, 4L
This course provides specialized instruction in various areas related to the diesel mechanics industry. Emphasis is placed on meeting student need.
|
| |
-
DEM 191 - Special Projects in Diesel Mechanics
3 Hours: 1T, 4L
This course provides information on current trends in diesel mechanics as they relate to employment responsibilities. Topics may vary by term to reflect relevant training needs by the industry.
|
| |
-
DEM 192 - CO-OP Elective
3 Hours: 15i
This course allows the student to work parallel in a job closely related to the student’s major while attending college. The grade is based on the employer’s evaluation of the student’s productivity, an evaluation work report submitted by the student, and the student’s learning contract.
|
| |
-
DEM 196 - CO-OP Elective
1 Hours: 5i
This course allows the student to work parallel in a job closely related to the student’s major while attending college. The grade is based on the employer’s evaluation of the student’s productivity, an evaluation work report submitted by the student, and the student’s learning contract.
|
| |
-
DEM 197 - CO-OP Elective
2 Hours: 10i
This course allows the student to work parallel in a job closely related to the student’s major while attending college. The grade is based on the employer’s evaluation of the student’s productivity, an evaluation work report submitted by the student, and the student’s learning contract.
|
Economics |
| |
-
ECO 231 - Principles of Macroeconomics
3 Hours
Prerequisite: RDG 085 or higher placement
This course is an introduction to macroeconomic theory, analysis, and policy applications. Topics include the following: scarcity, supply and demand, national income analysis, major economic theories concerning monetary and fiscal policies as stabilization measures, the banking system, and other economic issues or problems including international trade.
|
| |
-
ECO 232 - Principles of Microeconomics
3 Hours
Prerequisite: RDG 085 or higher placement
This course is an introduction of the microeconomic theory, analysis, and applications. Topics include scarcity, the theories of consumer behavior, production and cost, markets, output and resource pricing, and international aspects of microeconomics.
|
Electrical Technology |
| |
-
ELT 100 - Applied Electronic Computation
3 Hours: 3T
Prerequisite or Co-Requisite: ELT 108
This course is an applied mathematics and algebra course for students in electronics or similar programs. Topics include decimals, fractions, negative numbers, powers and roots, metric systems, logarithms, applied trigonometry and algebra. Upon completion of this course a student will be able to perform applied mathematics calculations needed in Electronics.
|
| |
-
ELT 108 - DC Fundamentals
3 Hours: 1T, 2L
Prerequisite or Co-Requisite: ELT 100
This course is designed to provide students with a working knowledge of basic direct current (DC) electrical principles. Topics include safety, basic atomic structure and theory, magnetism, conductors, insulators, use of Ohm’s law to solve for voltage, current, and resistance, electrical sources, power, inductors, and capacitors. Students will perform lockout/tagout procedures, troubleshoot circuits and analyze series, parallel, and combination DC circuits using the electrical laws and basic testing equipment to determine unknown electrical quantities.
|
| |
-
ELT 109 - AC Fundamentals
3 Hours: 1T, 2L
Prerequisite: ELT 108 or ILT 106
This course is designed to provide students with a working knowledge of basic alternating current (AC) electrical principles. Topics include basic concepts of electricity, electrical components, basic circuits, measurement instruments, the laws of alternating current, and electrical safety with lockout procedures. Hands on laboratory exercises are provided to analyze various series, parallel, and combination alternating current circuit configurations containing resistors, inductors, and capacitors. Upon course completion, students will be able to describe and explain alternating current circuit fundamentals such as RLC circuits, impedance, phase relationships, and power factors. They should also be able to perform fundamental tasks associated with troubleshooting, repairing, and maintaining industrial AC systems.
|
| |
-
ELT 110 - Wiring Methods
3 Hours: 1T, 4L
Prerequisite: ELT 108 or ILT 107
This course is a study of various tasks, wiring methods, materials, and associated NEC requirements needed to work in residential and commercial wiring courses.
|
| |
-
ELT 114 - Residential Wiring Methods
3 Hours: 2T, 3L
Prerequisite: ELT 109 or ILT 107
This course is a study of residential wiring practices and methods, the NEC requirements, and residential blueprint interpretations. This is a CORE course.
|
| |
-
ELT 115 - Residential Wiring Methods II
3 Hours: 2T, 3L
Prerequisite: ELT 114
This course is a study of residential wiring practices and methods, the NEC requirements, and residential blueprint interpretations. This is a CORE course.
|
| |
-
ELT 117 - AC/DC Machines
3 Hours: 1T, 4L
Prerequisite: ELT 109 or ILT 107
This course covers the theory and operation of DC motors and single and three phase AC motors; labs will reinforce this knowledge. Emphasis is placed on the various types of single and three phase motors, wiring diagrams, starting devices, and practical application in the lab. This is a CORE course.
|
| |
-
ELT 118 - Commercial/Industrial Wiring I
3 Hours: 1T, 4L
Prerequisite: ELT 110
Co-Requisite: ELT 244
This course focuses on principles and applications of commercial and industrial wiring. Topics include electrical safety practices, an overview of National Electric Code requirements as applied to commercial and industrial wiring, conduit bending, circuit design, pulling cables, transformers, switch gear, and generation principles.
|
| |
-
ELT 122 - Advanced AC/DC Machines
3 Hours: 2T, 3L
Prerequisite: ELT 117 or ILT 167
This course focuses on single and three-phase motors and also introduces students to DC motors. Emphasis is placed on field wiring, various types of AC and DC motors, troubleshooting procedures, and utilization of test equipment. Upon completion, the student should be able to explain, wire, troubleshoot, and test all types of AC and DC electric motors.
|
| |
-
ELT 181 - Special Topics in Electrical Technology
3 Hours: 0-3T, 0-6L
This course provides specialized instruction in various areas related to electrical technology. Emphasis is placed on meeting students’ needs.
|
| |
-
ELT 194 - Practicum/Intern/CO-OP
3 Hours: 6L
Prerequisite: Complete at least fifteen (15) hours in electrical classes.
This course provides practical experience in the electrical craft. Work is done as an electrician’s helper or at a higher working level on advanced special projects or advanced research/study in a directed area of the field. Emphasis is placed on gaining hands-on experience with tools of the trade as well as a better understanding of NEC directives while studying in the classroom one hour per week. Upon completion, the student should possess a higher state of proficiency in the basic skills and a better knowledge of testing for the Electrical Journeyman’s Block Test.
|
| |
-
ELT 200 - Special Projects
3 Hours: 6L
Prerequisite: Complete at least fifteen (15) hours in electrical classes.
This course provides additional time and/or practice for the electrical technology major on a project which will enhance the student’s abilities to perform required tasks. Emphasis is placed on the upgrading of student skill and ability. Upon completion, the student should be able to perform at a higher level within their chosen field of study.
|
| |
-
ELT 206 - OSHA Safety Standards
3 Hours: 3T
This course provides the student with the knowledge of OSHA safety standards as required by this organization and as it relates to the job site. Emphasis is placed on overall safety practices, construction site safety practices, and safety procedures required by federal and state laws. Upon completion, the student should be able to understand the requirements of OSHA as it relates to general and specific construction sites.
|
| |
-
ELT 209 - Motor Controls I
3 Hours: 1T, 4L
Prerequisite or Co-Requisite: ELT 117 or ILT 167
This course covers the use of motor control symbols, magnetic motor starters, running overload protection, push button stations, sizing of magnetic motor starters and overload protection, and complex ladder diagrams of motor control circuits. Topics include sizing magnetic starters and overload protection, the use of push-button stations, ladder diagrams, and magnetic motor starters in control of electric motors, wye-delta starting, part start winding, resistor starting, and electric starting devices. Upon completion, students should be able to understand the operation of motor starters and overload protection, interpret ladder diagrams using push-button stations, and understand complex motor control diagrams. This is a CORE course.
|
| |
-
ELT 212 - Motor Control II
3 Hours: 2T, 3L
Prerequisite: ELT 209 or ILT 197
This course covers complex ladder diagrams of motor control circuits and the uses of different motor starting techniques. Topics include wye-delta starting, part start winding, resistor starting, and electronic starting devices. Upon completion, the student should be able to understand and interpret the more complex motor control diagrams and understand the different starting techniques of electrical motors.
|
| |
-
ELT 217 - Transformers
3 Hours: 2T, 3L
Prerequisite or Co-Requisite: ELT 117 or ILT 167
This course is designed to train the student in the theory of operation, various connections, troubleshooting, and repair of single phase as well as three phase transformers. KVA load calculations and applications will also be covered in the class. Upon completion, the student should be able to perform calculations relating to transformers, make proper Delta and WYE connections, and understand the basic polarity and voltage test for each application.
|
| |
-
ELT 221 - Electronics for Electricians
3 Hours: 2T, 1L
This course introduces the basic principles of solid state electronic equipment as found in many electrical and motor control circuits. Emphasis is placed on fundamental concepts of diodes, transistors, FETs and MOSFETs as they are used in electrical control circuits. Upon completion, the student should be able to explain the basic operation of these solid state components and perform basic troubleshooting tasks.
|
| |
-
ELT 224 - Security and Alarm Systems
3 Hours: 2T, 1L
This course introduces the basic operation and installation of home and business security and fire alarm systems as well as low voltage (under 30v) systems such as lighting, door chimes, and intercom systems. Emphasis is placed on installation of home and business security and fire alarm systems. Upon completion, students should be able to install residential and commercial security systems in accordance with code and directives.
|
| |
-
ELT 230 - Programmable Controls
6 Hours: 4T, 4L
Prerequisite: ELT 209 or ILT 197
This state-of-the art course includes the fundamental principles of programmable logic controls (PLCs) including hardware, programming, and program design. Emphasis is placed on hardwiring associated with PLC, different options available with most PLCs, basic ladder logic programming, developing working programs, timers, counters, different special functions, and designing programs from existing hardwired systems. Upon completion, students will develop programs, load programs into PLCs, and troubleshoot systems.
|
| |
-
ELT 231 - Programmable Controls I
3 Hours: 2T, 3L
Prerequisite: ELT 209 or ILT 194
This state-of-the art course includes the fundamental principles of programmable logic controls (PLCs) including hardware and programming. Emphasis is placed on, but not limited to, the following: hardwiring associated with the PLC, different options available with most PLCs, and basic ladder logic programming. Upon completion, the student must demonstrate ability by developing programs, loading programs into real world PLCs, and troubleshooting the system.
|
| |
-
ELT 232 - Programmable Controls II
3 Hours: 2T, 3L
Prerequisite: ELT 231 or ILT 194
This state-of-the-art course includes the principals of PLCs, including hardware, programming, and program design. Emphasis is placed on, but not limited to, the following: developing working programs, timers, counters, and special functions, as well as designing programs from existing hardwired systems. Upon completion, the student must demonstrate ability by developing programs, loading programs into real world PLCs, and troubleshooting the system.
|
| |
-
ELT 233 - Applied Programmable Controls
3 Hours: 2T, 2L
Prerequisite: ELT 232
This state-of-the-art course covers the more advanced topics of PLCs. Emphasis is placed on, but not limited to the following: high-speed devices, analog programming, designing complete working systems, start-up and troubleshooting techniques, and special projects. Upon completion, the student must demonstrate ability by developing programs, loading programs into PLCs, and troubleshooting the system.
|
| |
-
ELT 241 - National Electric Code
3 Hours: 3T
This course introduces the students to the National Electric Code and text and teaches the student how to find needed information within this manual. Emphasis is placed on locating and interpreting needed information within the NEC code manual. Upon completion, the student should be able to locate the NEC code requirements for a specific electrical installation.
|
| |
-
ELT 242 - Journeyman-Master Prep Exam
3 Hours: 3T
Prerequisite: Final semester of AAS or Certificate program or currently practicing in electrical discipline
This course is designed to help prepare a student to take either the Journeyman or Master Certification Exam. Emphasis is placed on review of electrical concepts and/or principles, practice tests, and test-taking procedures. Upon completion, the student should be able to pass the Journeyman/Masters Certifying Exam.
|
| |
-
ELT 243 - Electrical Cost Estimating
3 Hours: 3T
Prerequisite: ELT 110 and ELT 114
This course provides an in-depth study of calculating wiring materials required and labor needed by man hours to complete a job. Emphasis is placed on documenting the scope of work required using various take-off sheets and the correct means by which to arrive at total job costs. Upon completion, the student should be able to perform actual calculations of sample jobs including overhead and operating costs.
|
| |
-
ELT 244 - Conduit Bending and Installation
3 Hours: 2T, 3L
This course provides the student the knowledge to properly bend electrical metallic tubing, rigid galvanized and intermediate metal conduit, and PVC conduit. Emphasis is placed on the theory and practical application of conduit bending methods. Upon completion, the student will measure, layout, and successfully bend conduit using hand type, mechanical, and hydraulic benders.
|
| |
-
ELT 245 - Electrical Grounding Systems
3 Hours: 3T
This course provides the knowledge to understand how to properly ground an electrical system. Emphasis is placed on, but not limited to the following: residential installations, commercial installations, and the function of independent grounding elements. Upon completion, the students should be able to explain and design a simple grounding system.
|
| |
-
ELT 246 - Advanced Electrical Raceways
3 Hours: 1T, 2L
Prerequisite: ELT 244
This course focuses on advanced methods and procedures used to bend larger electrical conduit raceways as well as the installation of various types of cable trays and their components. The course focuses on NEC requirements as they pertain to installations.
|
| |
-
ELT 247 - Conductor and Cabling Techniques
3 Hours: 2T, 1L
Prerequisite: ELT 118
This course introduces the student to tools, materials, and techniques used in conductor installations, conductor terminations and splices.
|
Engineering |
| |
-
EGR 101 - Engineering Foundations
3 Hours
Prerequisite: MTH 112 or higher
Co-Requisite: MTH 113 or higher
This course introduces the student to engineering as a profession, basic engineering skills, and the design process. The course includes components to develop teaming, as well as oral and written communication skills. It also provides an introduction to computer tools used by engineers (spreadsheet, word processing, presentation software, internet access).
|
| |
-
EGR 125 - Modern Graphics for Engineers
3 Hours
This course provides an introduction to manual and computer-assisted techniques of graphic communication employed by professional engineers. Topics include lettering; instrumental and computer-aided drafting; technical sketching; orthographic projection; and pictorial, sectional, and auxiliary views and dimensioning.
|
| |
-
EGR 157 - Computer Methods for Engineers using MATLAB
3 Hours
Prerequisite: MTH 125 or higher
This course introduces students to the concepts and practices involved in using high-level computer environments to solve engineering problems. Programming environments such as MATLAB will be used.
|
| |
-
EGR 220 - Engineering Mechanics - Statics
3 Hours
Prerequisite: PHY 213
Co-Requisite: MTH 227
This course includes vector algebra, force and moment systems, equilibrium of force systems, trusses, friction and property of surfaces.
|
| |
-
EGR 236 - Engineering Mechanics - Dynamics
3 Hours
Prerequisite: EGR 220
This course includes kinematics of particles, plane kinematics of rigid bodies, kinetics of particles and rigid bodies by Newton’ s Laws; principles of work-energy and impulse-momentum.
|
English |
| |
-
ENG 092 - Basic English I
4 Hours
This course is a review of basic writing skills and basic grammar. Emphasis is placed on the composing process of sentences and paragraphs in standard written English. The student should demonstrate these skills chiefly through the writing of well-developed, multi-sentence paragraphs.
|
| |
-
ENG 093 - Basic English II
4 Hours
Prerequisite: ENG 092 or equivalent placement score
This course is a review of composition skills and grammar. Emphasis is placed on coherence, the use of a variety of sentence structures in the composing process, and on standard written English usage. The student should demonstrate these skills chiefly through the writing of paragraph blocks and short essays.
|
| |
-
ENG 100 - Vocational Technical English I
3 Hours
This course is designed to enhance reading and writing skills for the workplace. Emphasis is placed on technical reading, job-related vocabulary, sentence writing, punctuation, and spelling with substantial focus on occupational performance requirements. Upon completion, students should be able to identify main ideas with supporting details and produce mechanically correct short writings appropriate to the workplace.
|
| |
-
ENG 101 - English Composition I
3 Hours
Prerequisite: RDG 085 and ENG 093 or higher placement
English Composition I provides instruction and practice in the writing of at least six (6) extended compositions and a research paper. The development of analytical and critical reading skills as well as basic reference and documentation skills in the composition process are also emphasized. English Composition I includes instruction and practice in library usage.
|
| |
-
ENG 102 - English Composition II
3 Hours
Prerequisite: A letter grade of C or higher in ENG 101
English Composition II provides instruction and practice in the writing of six (6) formal, analytical essays, at least one of which is a research project using outside sources and/or references effectively and legally. Additionally, English Composition II provides instruction in the development of analytical and critical reading skills in the composition process. English Composition II includes instruction and practice in library usage.
|
| |
-
ENG 246 - Creative Writing I
3 Hours
Prerequisite: A letter grade of C or higher in ENG 102
This course provides instruction and practice in the writing of critical analysis of imaginative forms of literature. Emphasis is placed on originality in the creative writing process, and this course may include instruction on publishing. The student will compose a significant body of imaginative literature, which may be read by or to the class.
|
| |
-
ENG 251 - American Literature I
3 Hours
Prerequisite: A letter grade of C or higher in ENG 102
This course is a survey of American literature from its inception to the middle of the nineteenth century. Emphasis is placed on representative works and writers of this period and on the literary, cultural, historical, and philosophical forces shaping these works and reflected in them. Upon completion and in written compositions, the student should be able to interpret the aesthetic and thematic aspects of these works, relate the works to their historical and literary contexts, and understand relevant criticism and research.
|
| |
-
ENG 252 - American Literature II
3 Hours
Prerequisite: A letter grade of C or higher in ENG 102
This course is a survey of American literature from the middle of the nineteenth century to the present. Emphasis is placed on representative works and writers of this period and on the literary, cultural, historical, and philosophical forces shaping these works and reflected in them. Upon completion, the student should be able to interpret the aesthetic and thematic aspects of these works, relate the works to their historical and literary contexts, and understand relevant criticism and research.
|
| |
Page: 1
| 2
| 3
| 4
| 5
| 6
| 7
| 8
| 9
|
|
|
Print this Page